Rugged Tactical Inverter
NEMA connectors on Universal Mount Inverter
P/N: ETI0018-1006
DC/AC Power Inverter
1000 VA, 600 Watts
24 VDC In
Selectable 100/110/120* VAC Out

Features

True sinewave output (THD < 3%)
Power On-Off Remote Control
Input & Output fully isolated
Load control cooling fan
Advanced microprocessor
Built-in transfer switch & AC circuit breaker
ROF (Remote Override Function) or ignition lockout function option
Speed up transfer time & synchronized operation with utility AC source
Input polarity reverse/ under voltage/ over voltage protections
Output short circuit/ overload/ over temperature protections
Tri-color indicators display input, output level & failure status
e-13/ CE /FCC approved
Optional 220 /230 /240 VAC Out

Model Numbers:
ETI0018-1006
AC Output
AC Voltage
 100 / 110 / 120 VAC
Rated Power
 600 W
Surge Power
 800 W
Waveform
 True sinewave (THD < 3)
Frequency
 50 / 60 Hz selectable by DIP switch
AC Regulation
 +/- 3
Power Factor Allowed
 COS -90° ~ COS +90°
Standard Receptacles
 HARDWARE
LED Indicator
 Input voltage level, output load level & fault status
DC Input
No Load Current Draw
  0.87A  0.43A  0.23A
DC Voltage
  12 VDC   24 VDC  48 VDC
Voltage Range
  10.5~15.0 VDC  21~30 VDC  42~60 VDC
Efficiency (Typ.)
  87.0  90.0  92.0
Fuse
  35A x 2  15A x 24  10A x 2
Circuit Breaker
 7 A
Synchronous AC Transfer
 Yes
Transfer Switch
 10
Transfer Time
 4~8 msec
Remote Control Unit
 CR8 optional
Protection
Low Battery Alarm
  11 VDC  22 VDC  44 VDC
Low Battery Shutdown
  10.5 VDC  21.0 VDC  42.0 VDC
Over load
 Shut off output voltage, re-power on to recover
Over Voltage
  15.3 VDC  30.6 VDC  61.2 VDC
Over Temperature
 Shut off output voltage, recovers automatically after temperature goes down 
Output Short
 Shut off output voltage, re-power on to recover
Battery Polarity
 By fuse opening
Environmental
Working Temperature
 0 ~ +40° C
Working Humidity
 20 ~ 90 RH non-condensing
Storage Temp. Humidity
 -30° C ~ +70° C / -22° F ~ +158° F / 10~95
Standards
Safety Standards
 Meets UL458
Isolation Resistance
 I/P ~ O/P: 100M Ohms / 500 VDC
EMI & Radiation
 Compliance to FCC Class A
EMS Immunity
LVD
e-MARK
Mechanical
Dimensions
 393 x 156 x 84 MM (L x W x H)
Packaging
 4.0 kgs; 4 sets / 16 kgs / CARTON
Cooling
 Load controlled cooling fan

Back | Home | Top
 
Energy Technologies, Inc.
Email Successfully Sent