Rugged Universal Mount Sinewave Inverter
rear view of universal mount inverter
P/N: ETI0018-1115
DC/AC Power Inverter
2000 VA, 1500 Watts
12 VDC In
Selectable 100/110/120* VAC Out


Features

True sinewave output (THD < 3%)
Power On-Off Remote Control
Input & Output fully isolated
Load control cooling fan
Advanced microprocessor
Built-in transfer switch & AC circuit breaker
ROF (Remote Override Function) or ignition lockout function option
Speed up transfer time & synchronized operation with utility AC source
Input polarity reverse/ under voltage/ over voltage protections
Output short circuit/ overload/ over temperature protections
Tri-color indicators display input, output level & failure status
e-13/ CE /FCC approved
Optional 220 /230 /240 VAC Out

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Model Numbers:
AC Output
AC Voltage
 100 / 110 / 120 VAC
Rated Power
 1500 W
Surge Power
 3000 W
Waveform
 True sinewave (THD < 3%)
Frequency
 50 / 60 Hz selectable by DIP switch
AC Regulation
 +/- 3%
Power Factor Allowed
 COS -90° ~ COS +90°
Standard Receptacles
 HARDWARE
LED Indicator
 Input voltage level, output load level & fault status
DC Input
No Load Current Draw
  1.45A  0.75A  0.40A
Stand-By Current Draw
  0.28A  0.15A  0.09A
DC Voltage
  12 VDC   24 VDC  48 VDC
Voltage Range
  10.5~15.0 VDC  21~30 VDC  42~60 VDC
Efficiency (Typ.)
  88.0%  91.0%  92.0%
Fuse
  40A x 5  20A x 5  20A x 3
Circuit Breaker
 16 A
Synchronous AC Transfer
 Yes
Transfer Switch
 25 A
Transfer Time
 Inverter to utility AC:8~10 msec.: Utility AC to inverter:12~14 msec
Remote Control Unit
 CR6 / CR8 optional
Protection
Low Battery Alarm
  11 VDC  22 VDC  44 VDC
Low Battery Shutdown
  10.5 VDC  21.0 VDC  42.0 VDC
Over load
 Shut off output voltage, re-power on to recover
Over Voltage
  15.3 VDC  30.6 VDC  61.2 VDC
Over Temperature
 Shut off output voltage, recovers automatically after temperature goes down 
Output Short
 Shut off output voltage, re-power on to recover
Battery Polarity
 By fuse opening
Environmental
Working Temperature
 0 ~ +40° C
Working Humidity
 20% ~ 90% RH non-condensing
Storage Temp. Humidity
 -30° C ~ +70° C / -22° F ~ +158° F / 10~95%
Standards
Safety Standards
 Meets UL458
Isolation Resistance
 I/P ~ O/P: 100M Ohms / 500 VDC
EMI & Radiation
 Compliance to FCC Class A
EMS Immunity
LVD
e-MARK
Mechanical
Dimensions
 403 x 236 x 115 MM (L x W x H)
Packaging
 7.0 kgs; 2 sets / 15 kgs / CARTON
Cooling
 Load controlled cooling fan

Back | Home | Top
 
Energy Technologies, Inc.
Email Successfully Sent