Rugged Universal Mount Sinewave Inverter
rear view of universal mount inverter
P/N: ETI0018-1720
DC/AC Power Inverter
3000 VA, 2000 Watts
48 VDC In
Selectable 220*/230/240 VAC Out

Features

True sinewave output (THD < 3%)
Power On-Off Remote Control
Input & Output fully isolated
Load control cooling fan
Advanced microprocessor
Output frequency 50/60 Hz selectable
Low power saving mode to conserve energy
Built-in transfer switch & AC circuit breaker
ROF (Remote Override Function) or ignition lockout function option
Speed up transfer time & synchronized operation with utility AC source
Input polarity reverse/ under voltage / over voltage protections
Output short circuit/ overload / over temperature protections
Tri-color indicators display input, output level & failure status
e-13/ CE /FCC approved 
Optional 100 /110 /120 VAC Out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model Numbers:
AC Output
AC Voltage
 220 / 230 / 240 VAC
Rated Power
 2000 W
Surge Power
 4000 W
Waveform
 True sinewave (THD < 3%)
Frequency
 50 / 60 Hz selectable by DIP switch
AC Regulation
 +/- 3%
Power Factor Allowed
 COS -90° ~ COS +90°
Standard Receptacles
 HARDWARE
LED Indicator
 Input voltage level, output load level & fault status
DC Input
No Load Current Draw
  2.30A  1.10A  0.65A
Stand-By Current Draw
  0.60A  0.30A  0.15A
DC Voltage
  12 VDC  24 VDC  48 VDC
Voltage Range
  10.5~15.0 VDC  21~30 VDC  42~60 VDC
Efficiency (Typ.)
  90.0%  93.0%  94.0%
Fuse
  40A x 8  20A x 8  20A x 4
Circuit Breaker
 15 A
Synchronous AC Transfer
 Yes
Transfer Switch
 15 A
Transfer Time
 Inverter to utility AC:8~10 msec.: Utility AC to inverter:12~14 msec
Remote Control Unit
 CR6 / CR8 optional
Protection
Low Battery Alarm
  11 VDC  22 VDC  44 VDC
Low Battery Shutdown
  10.5 VDC  21.0 VDC  42.0 VDC
Over load
 Shut off output voltage, re-power on to recover
Over Voltage
  15.3 VDC  30.6 VDC  61.2 VDC
Over Temperature
 Shut off output voltage, recovers automatically after temperature goes down 
Output Short
 Shut off output voltage, re-power on to recover
Battery Polarity
 By fuse opening
Environmental
Working Temperature
 0 ~ +40° C
Working Humidity
 20% ~ 90% RH non-condensing
Storage Temp. Humidity
 -30° C ~ +70° C / -22° F ~ +158° F / 10~95%
Standards
Safety Standards
Isolation Resistance
EMI & Radiation
 Compliance to EN55022 Class A
EMS Immunity
 Compliance to EN61000-3 -2, 3
LVD
 Compliance to EN60950-1
e-MARK
 Compliance to e-13 * 72/245/EEC, 95/54/EC
Mechanical
Dimensions
 433 x 332 x 115 MM (L x W x H)
Packaging
 711.2 kgs; 1 set / 13 kgs / CARTON
Cooling
 Load controlled cooling fan

Back | Home | Top
 
Energy Technologies, Inc.
Email Successfully Sent