Part Number: ETI0001-1252
Model: ETI0001-S3R-KIA/1.5
TAC-4 P/N: S5444-00001
Rugged MilSpec 1550 VA
Rackmount Global UPS
Hewlett
Packard / TAC-4, TAC-JW and Tomahawk Standard Product Military Power® Isolated MilSpec
UPS 1550 VA Rugged Rack Mount,
Modular Power System
Accepts 85-270 VAC, 46-440 Hz Input
Or 22-32 VDC Input from HMMWV or other Military Vehicle
Plus Front Access Hot Swappable Battery Module
ETI0001-1252 Rugged MilSpec
UPS Standard Front Panel Layout
ETI0001-1252 Rugged MilSpec UPS Standard
Rear Panel Layout
Optional 1U Shallow Depth, Universal Mount PDU, ETI0013-1101
Front View showing 2 CBs and 8 Outlets with Cord Restraints
Optional ETI0013-1101 Rear View showing provisions
for
4 Wall Mount Type Transformer Supplies with Tie Downs
Optional ETI0013-1101 Top View showing Shallow Depth
The
field proven WorldPower UPS line is ideally suited for
military, industrial, computer and telecommunications applications
requiring high reliability, rugged construction, compact
size and light weight design. These units are equally suited
for use in shipboard, airborne, vehicular, field deployed
or fixed locations with controlled or uncontrolled environments.
The ETI0001-1252 is specifically designed for lightweight
global power deployment or equally well in shallow depth
racks including TAC-4 racks and interfacing with either
the TAC-4 PDU or any of numerous ETI
PDUs.
The
heavy-duty chassis occupies only 7" (4U) of rack space
while delivering up to 1550 VA of clean, uninterruptible
power. The rounded metal corners and rugged handles, aid
in safe handling. Internally, all major components are
well secured and electrically insulated to prevent damage
due to shock and vibration. The optional heavy-duty rack
slides provide easy installation and removal of the unit
with full extension.
The
internal shielded input transformer provides galvanic isolation
with provisions for both domestic (115 VAC, CONUS) and
international (230 VAC, OCONUS) input voltages. The autoranging
input voltage selection allows inputting either 115 VAC
or 230 VAC without having to open the UPS enclosure. Special
EMI/RFI filters and input power factor correction minimize
both input current and harmonics. The input switch and
the galvanic isolation transformer provide a double
pole isolated source for shipboard systems or overseas
locations where phase references and grounding are not
consistent. Alternately,
the unit also accepts vehicular or aircraft power from
nominal 24 VDC systems. This allows the unit to be operated when no AC source is
available.
The
LED arrays keep the operator informed as to the unit's
status including load and battery levels. The high intensity
audible alarm can be heard in high noise environments.
All controls and protective devices are brought to front
and rear panels with critical switches having finger guards.
Further, all front panel devices are recessed to prevent
damage or accidental operation.
The
ETI0001-1252
has the added benefit of having a field replaceable battery
via front drawout battery module. The battery is a true
hot-swappable module and does not require going to bypass
like competing units. Even with this battery module removed,
this UPS can continue to operate as an electronic power
conditioner and frequency converter, providing clean, well
regulated, sinusoidal power to the load. The batteries are
maintenance free with immobilized electrolyte and are
constructed of flame retardant materials for added safety.
For more information, see the
Battery Technology
section.
The rear
panel provides locking connectors for the input and output
power with various optional configurations available. This
reverse air flow version draws air through the front and
exhausts out the rear vent into the rack. A removable and
washable intake air filter and high capacity stainless steel
ball bearing fan provide added protection in both controlled
and hostile environments.
The two status D shell connectors provide both a contact
and serial interface with optional
computer
software providing loss of AC and low battery status
as well as remote shut down capability.
See
the Power Distribution Units section
for a listing of stand alone PDUs. See the N5 Series
UPS for
a version of this UPS with an integrated PDU and remote
control
Overall,
the WorldPower line is uniquely qualified for critical
shipboard, vehicle, airborne or land based systems combining
advanced modular design features with highly reliable construction.
Technical
Specifications: ETI0001-1252
AC OUTPUT
Output
voltage:
120
VAC true sinewave std, up to 600 VAC optional
Output
rating: UPS
1550
VA, standard in 4U x 19" chassis
0.65-0.75 pf std, optional configurations to 24,000 VA
Non-linear
load capacity:
Up
to 100% non-linear load capability w/o derating
Output
voltage regulation: UPS
± 3.0%
static regulation of nominal
± 4.0% dynamic (0 to 50% load step)
Overload
surge capacity:
110%
for 10 minutes; 125% for 30 seconds
Harmonic
distortion:
Less
than 5.0% into 100% non-linear load
Output
frequency: UPS
60
Hz ± 1.0% independent of input frequency
Operational
status
Status,
load and battery (16) LEDs, w/contacts
RS-232 asynchronous serial status COM port
Adjustable level,+90 dB audible alarm w/on/off
AC INPUT
Input
voltage selection:
Autoranging
from nominal 115 VAC to 230 VAC
Input
voltage tolerance: UPS
+15%
-25%, or 85-135 and 170-270
Input
frequency:
From
46 Hz to 440 Hz
Input
power factor:
Better
than 99% typically
Input/output
isolation:
2000
VA, >120 dB common mode, <1.0 ma leakage
Input
transient suppression:
Complies
with IEEE 587 and UL 1449
Input
control/protection:
Guarded
2 pole switch (S1) w/fuse (F2)
Input
power connection:
MS
3102A-22-2P, 3 pin, locking
DC
INPUT / INTERNAL BATTERY
External
DC input:
Nominal
22 to 32 VDC
External
DC control/protection:
Guarded
2 pole switch (S3) w/rear mounted fuse (F3)
