P/N: ETI0019-2110
Tactical Wheeled Carry-On UPS
Rating: 1000 VA, 750 Watt

Input: 85-270 VAC, 45-70 Hz
Output: 120 VAC, 50/60 Hz

View a larger version of one of the small TCW images above
1 1 1 1 1

The field proven TacticalPower® UPS line is ideally suited for military, industrial, computer and telecommunications applications requiring high mobility, reliability, rugged construction, compact size and light weight design. These units are equally suited for use in vehicular, field deployed, shipboard, airborne, or fixed locations with controlled or uncontrolled environments. The ETI0019-2110 is specifically designed for lightweight global power deployment and/or interfacing with any of numerous ETI PDUs.

The heavy-duty case occupies a minimum of space while delivering up to 1000 VA/750 Watts of clean, uninterruptible power. The rounded corners and rugged handles, aid in safe handling. Internally, all major components are well secured and electrically insulated to prevent damage due to shock and vibration. Designed to be portable, the unit can be used in a horizontal or vertical surface or even stored in a backpack.

The provisions for both domestic (CONUS) and international (OCONUS) input voltages, and autoranging input voltage selection allows inputting any AC voltage from 85 to 270 VAC (i.e. nominal 100, 115, 120, 200, 220, 230 or 240 VAC sources) and any frequency from 45 to 70 (i.e. nominal 50 or 60 Hz sources) without special cables or having to open the UPS enclosure. Optional 12 or 24 VDC versions are also available.

The high-reliability LED arrays keep the operator informed as to the unit's status including load and battery levels. All controls and protective devices are brought inside the case to prevent damage or accidental operation.

The ETI0019-2110 can continue to operate as an electronic power conditioner and frequency converter even with it's battery drained, providing clean, well regulated, sinusoidal power to the load. The batteries are maintenance free with immobilized electrolyte and are constructed of flame retardant materials for added safety.

A removable and washable intake air filters and high capacity stainless steel ball bearing fans provide added protection in both controlled and hostile environments.

Maintaining documentation for equipment in the field has always been an issue. Instead of having to carry bulky paper documentation, the ETI0019-2110 incorporates the eDocs Port™, a patented feature unique to Energy Technologies, Inc. This flash drive contains all the relevant documentation for the unit at hand. This includes Operation and Maintenance manuals as well as training and troubleshooting guides. Utilizing a standard USB interface, these standardized electronic documents are readily available to the user.

Overall, the TacticalPower line is uniquely qualified for critical vehicle, airborne, shipboard, or land based systems combining advanced modular design features with highly reliable construction.

Transportable Tactical 1 kVA UPS

Output voltage: 120 VAC true sinewave output standard
Output rating: UPS 1000 VA, 750 watts standard, 
Non-linear load capacity: UPS Up to 100% non-linear load capability w/o derating
Output voltage regulation: UPS ± 3.0% static regulation of nominal
± 4.0% dynamic (0 to 50% load step)
Overload surge capacity: UPS 110% for 10 minutes; 125% for 30 seconds
Harmonic distortion: UPS Less than 5.0% into 100% non-linear load
Output frequency: UPS 60 Hz or 50 Hz switch selectable
± 2.5% synchronized to utility
± 1.0% w/ utility not available
Operational status AC Input status, UPS operational, UPS alarm, Battery level,
Low battery, Load level, Overload, Warm/Hot temperature, Battleshort LEDs, +90 dB audible alarm w/audible on/off switch
Input voltage selection: Autoranging from nominal 85 VAC to 270 VAC
Input voltage tolerance: UPS +15% -25%, or 85-140 and 170-280 
@ full load without using battery, to 70 VAC @ 75% load
Input frequency: From 45 Hz to 70 Hz standard, optional to 440 Hz
Input/output isolation: up to 120 dB common mode, <2.0 ma leakage
Input transient suppression: Complies with IEEE 587, UL 1449 and Mil Std 1399
Input control/protection: Guarded circuit breaker (CB1)
Input power connections: One IEC320 male, 3 pin with cable restraint
Internal battery type: Maintenance free immobilized electrolyte,
Flame retardant materials (Oxygen Index 28+)
Internal battery life: Rated for continuous service life of 5 years
Internal battery protection: Guarded circuit breaker (CB2)
Internal battery time: 10+ minutes @ 750 watt load, 25+ minutes @ 50%
Internal battery recharge: Recharged to nominal in <8 hours
Internal battery replacement: Hot swap drawout/plug-in module from front of unit
<3 minutes to change battery modules
Battery expansion: Up to 24 hours w/ optional Battery Expansion Modules
Output circuits: Four AC outputs standard, several optional configurations
Output receptacles: AC output  NEMA 5-15R with dust covers, others optional
Dimensions (H x D x W): UPS 21.75 x 8.99 x 13.75 in (552 x 228 x 349 mm)
Unit weight:
      UPS and Battery
      UPS only
      Battery Module only

60 lb. (23 kg) with lift handles front and rear
34 lb. (11 kg) with lift handles front and rear
26 lb. (12 kg) with lift handle in front
Audible noise: Less than 47 dB @ 5.0 ft., ANSI "A" scale
Cooling type: High capacity, positive pressure, forced air
Air intake filter: Washable filter media, others optional
Storage temperature: -40° to 158° F ambient (-40° to 70° C)
Operating temperature: 32° to 126° F ambient ( 0° to 52° C), lower/ higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Storage elevation: Up to 50,000 ft (15,240 m), higher optional
Operating elevation: Up to 10,000 ft (3,048 m), higher optional
United States: Meets UL-1778 standard for UPS equipment,
Meets MIL-STDs 1275, 167-1, 454, 810, 1399-300A
& MIL-S-901
Canada: CSA C22.2 No. 107 UPS safety requirements
EMI Protection: EMI/RFI FCC Part 15, Class A; EN55022
  Cold Start, Alternate I/O Configurations, Battery Expansion,
Battery Charger/Conditioner, Power Distribution Units

Request a Quote or Product Info.
*(denotes required field)
Contact ETI by mail at:
Energy Technologies, Inc.
219 Park Avenue East
Mansfield, OH 44902-1845

Contact ETI by phone or fax:
Voice: 419-522-4444
FAX: 419-522-4466